|

ajax_PA_1_A_1925-6.gifAJAX PA 1925-6733 views• Description; Pressed aluminum threaded hub cap for an Ajax automobile which was built in Racine, Wisconsin in 1925 and 1926. This car was built by Nash after the LaFayette automobile failed and was renamed as the Nash Light Six on the Ajax’s first anniversary. The Ajax caps are quite rare because the car was only produced for one year.
• Size; The cap is 2 7/8” across the flats X 1 7/8” high with 2 5/8”- 16 threads.
• 3” x 1 7/8 x 2 5/8
hubcapco
|
|

Alemite.jpgAlemite283 viewsAftermarket cap with built in grease nipplehubcapco
|
|

Alfa_Romeo_PS_1_A.jpgAlfa Romeo147 viewsDescription: Large heavy pressed steel cap for an Alfa with internsl threads
Dimension: 4 3/4" diameter,3 3/8" internal threads, 1 7/8" high, weighs 1 lb 11 3/8 ozhubcapco
|
|

Allen_PS_1_A.jpgAllen121 viewsALLEN threaded hubcap. Allen automobiles were manufactured in Fostoria, Ohio from about 1914 to 1921. This cap is made of steel and measures about 2-3/4" in diameter. hubcapco
|
|

Allen_PS_1_B.jpgAllen108 viewsPressed steel - very heavy pittinghubcapco
|
|

American_Austin_PA_1_A.jpgAmerican Austin173 views• Description; Pressed aluminum threaded hub cap for an American Austin automobile built in Butler, Pennsylvania between the years of 1930 and 1935
• Size; The cap has an outside diameter of 3 ½” and is 1 5/8” high with 2 3/16”- 16 threads.
hubcapco
|
|

American_LaFrance_NPPB_1_A.jpgAmerican LaFrance NPPB281 viewsDescription: AMERICAN LaFRANCE fire truck. Nickel plated Pressed Brass threaded hubcap with external threads. CAP CLEARLY SAYS "FOUNDED 1845, AMERICAN LaFRANCE, ELMIRA N.Y., U.S.A.",
Size: Overall measurement is 4 1/4" with a height of 1 1/4". Threads approx 3 3/4" in. hubcapco
|
|

Amilcar_CFe_1_A.jpgAmilcar143 viewsDescription: Left hand iron cap for an Amilcar built in St Dennis & Seine (France) for an Amilcar 1921-36 . Identified as item32 page 6in Dennis Kuhn Snr's "Threaded Hubcaps Unlimited, The early ones 1880 to 1930" Gauche in French is left. Droite is right
Dimension: 4" diameter, 3 5/8" internal threads, 1 5/8" high, weighs 1 lb 6 5/8 ozhubcapco
|
|

Amilcar_CFe_1_B.jpgAmilcar110 viewshubcapco
|
|

Amilcar_CFe_2_A.jpgAmilcar132 viewshubcapco
|
|

Ansaldo_PB_1_B.jpgAnsaldo136 viewsDescription: Cast brass cap with internal threads for an Ansaldo
Dimension: 1 1/2" high, 1 3/4" across hex, 2 1/4" internal threads.hubcapco
|
|

Apperson_NPCB_4_A.jpgApperson122 viewsThis hubcap MEASURES 4” across is threaded on the inside for a secure fit
Has a Hexagon on the top with the word Apperson in cursive and underlined and is Impressed into the metal.
Hexagon is 2 ¼” across.
hubcapco
|
|

Apperson_NPCB_4_C.jpgApperson99 viewshubcapco
|
|

Apperson_PA_1_A.jpgApperson164 viewsDescription: Pressed Al threaded hubcap with brass insert
Size: The outside diameter is about 3 1/8" wide and about 1 7/8" high. hubcapco
|
|

Argyll_NPCB_1_A.jpgArgyll140 views• DESCRIPTION: Nickel plated cast brass threaded hub cap . The Argyll was built in Galsgow, Scotland by Hozier Engineering ( 1899-1905) then Argyll Motors 1905-1932
• SIZE: The cap has an outside diameter of 3.035” at the flange and 2.355” at the octagon and is just under 1 1/4” high
• WEIGHT: 10 ¾ oz (303 g)
hubcapco
|
|
765 files on 51 page(s) |
1 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|