|
|
Dayton_Wire_Wheel_CB_1_A.jpgDayton Wire Wheel79 viewsDescription: This is an early 1900 Dayton Wire Wheel Company Locking cap. Left side is indicated on the front of the cap.
Dimension: The threads are 2 1/4 and the height is 2 1/2. hubcapco
|
|
Dayton_Wire_Wheel_CB_1_B.jpgDayton Wire Wheel73 viewshubcapco
|
|
Dayton_Wire_Wheel_CB_1_C.jpgDayton Wire Wheel69 viewshubcapco
|
|
Deasy_NPCB_2_A.jpgDeasy96 viewsDescription. Was originally plated.
Dimension: 2" diameter (50mm), 1 5/8" external threads (42mm), 1 1/8" high (28mm), 1 5/8" across the sextant (42mm)hubcapco
|
|
|
|
|
DeDion_Bouton_NPCB_1_A.jpgDe Dion Bouton 1907110 views• Description; Nickel plated cast brass threaded hubcap for a De Dion Bouton automobile built in France between the years of 1883 thru 1932. I believe this cap is about 1907 era.
• Size; The cap has an outside diameter of just over 2 3/8” and is about 11/16” high with external threads.
• Weight: 6 1/8 oz (175 gms) hubcapco
|
|
Deemster_NPCB_1_C.jpgDeemster82 viewshubcapco
|
|
Deemster_NPCB_2_A.jpgDeemster94 viewshubcapco
|
|
Delage_PB_1_A.jpgDelage81 views• Description; Pressed brass threaded hub cap for a Delage automobile built in France between the years of 1905 and 1954.
• Size; The cap has an outside diameter of just over 2 9/16” and is just under 2 ¼” high.
• Weight: 6 ¼ oz (178 gms) hubcapco
|
|
Delahaye_CB_1_B.gifDelahaye81 viewsSide viewhubcapco
|
|
DeSoto_PA_1_A.jpgDeSoto103 viewsDescription: Pressed Al threaded Hub Cap for a Desoto. I have no idea what year.
Size: It measures about 4 inches diameter at the widest, threaded end diameter is 2 3/8 inches. It is 2 3/8 inches tall. hubcapco
|
|
DeSoto_PA_2_A.jpgDe Soto131 views• Description; Pressed aluminum threaded hub cap for a DeSoto automobile from the 1929-1930 era.
• Size; The cap has an outside diameter of 3 1/8” and is 1 7/8” high with 2 3/8”- 16 threads
hubcapco
|
|
DeSoto_PA_3_A.jpgDeSoto111 viewsDescription: Pressed aluminium threaded cap for a Desoto
Dimension: THE TOP OF THE CAP MEASURES 3 7/8" AND THE CAP IS 2" TALL THE NECK IS APPROXIMATELY 2 19/32" O.D., AND THE THREADS ARE 2 3/8" - 16
hubcapco
|
|
|
| 765 files on 51 page(s) |
 |
|
|
|
|
13 | |
|
|
|
|
