|
|
Locomobile_CB_3_B.jpgLocomobile90 viewshubcapco
|
|
Locomobile_CB_4_A.jpgLocomobile 1910109 viewsDescription: Threaded brass hubcap from a 1910 Locomobile.
Dimension: THREAD OD: 3 1/4 ID: 2 7/8 HGT: 1 3/8 FLATS: 3 WIDEST: 3 5/8
hubcapco
|
|
Locomobile_CB_4_B.jpgLocomobile 191098 viewshubcapco
|
|
Locomobile_CB_4_C.jpgLocomobile79 viewshubcapco
|
|
Locomobile_NPPB_4_A.jpgLocomobile83 viewsDescription:
Measurements: It measures 3 1/2 inches ID on the good threads and stands 2 1/4 inches tallhubcapco
|
|
Locomobile_NPPB_4_B.jpgLOcomobile80 viewshubcapco
|
|
Mack_-cap_A.jpgMack94 views4 3/4" diameter, 3 3/8" internal threadshubcapco
|
|
Marion-Handley_NPPB_1_A.jpgMarion Handley120 viewsDescription: The Marion-Handley automobile was built in Jackson, Michigan by the Mutual Motors Company from about 1916 to 1919. This cap appears to be made of plated brass.
Size: Measures about 3" across the threads. hubcapco
|
|
Marion-Handley_NPPB_1_C.jpgMarion Handley82 viewshubcapco
|
|
Marmon_Buffalo_Wire_Wheel_NPPS_1_A.jpgBuffalo Wire Wheel with Marmon Script145 viewsBuffalo Wire Wheel for a Marmon. The diameter of the threads measure approximately 3 3/8". Stamped on the side is: MS 4.5-RS-WIRE WHEEL CORP. OF A. BUFFALO. N.Y. Stamped on the top is: MARMON OFF ON RIGHT SIDEhubcapco
|
|
Marmon_Buffalo_Wire_Wheel_NPPS_1_Bjpg.jpgMarmon134 viewshubcapco
|
|
Marmon_Buffalo_Wire_Wheel_NPPS_1_C.jpgMarmon127 viewshubcapco
|
|
|
Marmon_PA_1_A.jpgMarmon 1928117 views• Description; Pressed aluminum threaded hub cap with a brass emblem for a Marmon automobile built in Indianapolis, Indiana between the years of 1902 and 1933.
• Size; The cap has an outside diameter of 4 7/16” and is 2 1/16” high with 2 5/8”- 16 threads.
hubcapco
|
|
|
| 765 files on 51 page(s) |
 |
|
|
|
|
29 | |
|
|
|
|
