|
|
Rollin_PA_1_A.jpgRollin 1924-5109 views• Description; Pressed aluminum threaded hub cap for a Rollin automobile built in Cleveland, Ohio between the years of 1924 and 1925.
• Size; The cap has an outside diameter of 3 5/16” and is about 2 ¼” high with 2 11/16”- 16 threads.
hubcapco
|
|
Roosevelt_Dayton_NPCB_1_A.jpgRoosevelt113 viewsDescription: Roosevelt Threaded Hubcap made in Indianapolis, Indiana 1929-1930. This cap is made of cast brass and is nickel plated (quite heavy). Size: Outside diameter is 5" and the outside thread diameter measures 2-3/4". Height is 2". hubcapco
|
|
Roosevelt_PA_1_A.jpgRoosevelt PA 1929-30126 views• Description; Pressed aluminum threaded hub cap for a Roosevelt automobile built in Indianapolis, Indiana between the years of 1929 and 1930 by the Marmon motor car company.
• Size; The cap has an outside diameter of just under 3 15/16” and is 2” high with 2 5/8”- 16 threads.
hubcapco
|
|
Rover_1913.jpgRover77 viewsThe Rover Six was the company's second four-wheeler design, with the chassis frame constructed of wood and flitch plate. The rack and pinion steering was an unusual feature for the period. The whole car was meant to be cheap and good value for money.
Single cylinder, 95 mm bore, 110 mm stroke, 780 cc, 6 bhp. Cruised at 20 mph. Price £105.
hubcapco
|
|
Rover_CA_1_A.jpgRover129 views• Description; Cast aluminium threaded hub cap for a Rover automobile built in Great Britain beginning in 1904. This cap has the stylized “R” on the face.
• Size; The cap has an outside diameter of 2 ¾” and is 2 1/16” high and 1 ¼ across the sextant.
• Weight: 4 3/8 oz (123 gms)hubcapco
|
|
Rover_NPPB_1_A.jpgRover 12/0486 viewsDescription: NPPB threaded hub cap from a Rover 12/04. Manufacture of the 12 series ran between the years 1912-1923.
Measurement: 3.29 in wide (82mm), 1 3/4 in high (44mm), 2 in (50mm) across the sextant
Weight: hubcapco
|
|
RR_NPPB_1_A.jpgRolls Royce Springfield127 views
• Description; Nickel plated cast brass threaded hubcap for a Springfield Rolls Royce manufactured in USA.
• Size; The cap has an outside diameter of 4 1/2” and is 1 ¾” high and 3 3/4” across the octaganol. Inside threads are 3 ½ “.
• Weight: 1 lb 2 1/8 oz
hubcapco
|
|
Rubgy_PA_1_A.jpgRugby109 viewsDESCRIPTION: Pressed aluminum threaded hubcap for a Rugby automobile. The Rugby was made by Durant and exported as the Rugby and sold in USA as the Star.
SIZE: The pressed aluminum cap is 1 7/8" high X 4 1/4" in diameter with 2 11/16"- 16 threadshubcapco
|
|
Salmson_NPCB_2_A.jpgSalmson81 viewshubcapco
|
|
Salmson_NPCB_3_A.jpgSalmson110 viewsDescription: Nickel plated cap for a French Salmson built by Societe des Moteurs Salmson, Billancourt, Seine 1921-1957 France.
Dimension: External thread is approx 75mm in good condition. Overall diameter approx 90mm.
hubcapco
|
|
Salmson_NPCB_3_C.jpgSalmson89 viewshubcapco
|
|
SayersScovill_NPPB_1_A.jpgSayers and Scovill109 views• DESCRIPTION: Nickel plated pressed brass threaded hubcap for an S&S vehicle built between the years of 1924 and 1930 by the Sayers & Scovill company of Cincinnati, Ohio. The company built automobiles and trucks during this period but were better known for their hearses and ambulances. I believe this is a rear wheel cap because of the large size.
• SIZE: The cap has an outside diameter of 4 13/16” and is 2 5/16” high with 4 ¾”- 16 threads.
hubcapco
|
|
|
Schacht.jpgSchacht 190778 viewsSchacht Manufacturing Co, USA . Before 1909 all Schacht cars were high-wheelers with the engine under the seat. Chain driven, several of these vehicles were seen on early Wellington roads. Unusual features include the free standing radiator and the long Concord springs.
18 hp, twin cylinders, 120 mm bore, 101 mm stroke, 2285 cc, chain drive to each rear wheel, infinitely variable friction drive with reverse, internal expanding brakes on rear wheels.
hubcapco
|
|
ScrippsBooth_PA_1_A.jpgScripps Booth95 views• Description; Pressed aluminium threaded hubcap for a Scripps Booth automobile built in Detroit, Michigan between the years of 1912 and 1922.
• Size; The cap has an outside diameter of 2.9” (74mm) and is 1.635” (42mm) high and 2 ¼” (58mm) at the octaganol
• Weight: 1 ¾ oz (50 gms) hubcapco
|
|
| 765 files on 51 page(s) |
 |
|
|
|
|
42 | |
|
|
|
|
