| Last additions |
Girling_NPCB_1_A.jpgGirling213 viewsDescription:Cap from a Girling (1913-14) made by Girling Motors Ltd, Bedford GB
A 3 wheeled cyclecar with single cylinder 6 hp engine.
Dimensions : 2.675 ins / 6.6 cms across the top, 265 grams weight
hubcapperJun 23, 2012
|
|
Columbia_Electric_Vehicle_NPPB_2_A.jpgColumbia Electric132 viewshubcapperJun 15, 2012
|
|
Pope_Waverley_CFe_1_C.jpgPope Waverley107 viewshubcapperJun 15, 2012
|
|
Pope_Waverley_CFe_1_B.jpgPope Waverley122 viewshubcapperJun 15, 2012
|
|
Pope_Waverley_CFe_1_A.jpgPope Waverley110 views Pope Waverly Electric antique automobile threaded screw on hubcap.It was manufactured in Indianapolis, Indiana between 1903-1907.
It is cast iron.
It is 2-3/4" OD and 1-1/2" high.
hubcapperJun 15, 2012
|
|
Saginaw_NPPB_1_C.jpgSaginaw Cycle Car100 viewshubcapperJun 11, 2012
|
|
Saginaw_NPPB_1_B.jpgSaginaw Cycle Car86 viewshubcapperJun 11, 2012
|
|
Saginaw_NPPB_1_A.jpgSaginaw102 viewsSaginaw antique threaded screw on hubcap.It was manufactured in Saginaw, Michigan between 1914-1915.Flamboyant cycle car.It is pressed brass with a nickel plating.
It is 2-7/8" OD and 7/8" high.
hubcapperJun 11, 2012
|
|
Parry_NPPB_1_C.jpgParry102 viewshubcapperJun 11, 2012
|
|
Parry_NPPB_1_B.jpgParry101 viewshubcapperJun 11, 2012
|
|
Parry_NPPB_1_A.jpgParry107 views Parry Auto antique threaded screw on hubcap.Manufactured in Indianapolis, IND from 1910-1912..
It is pressed brass w/ a brass insert.
It measures: 2-3/4" OD and 1-3/8" high.
hubcapperJun 11, 2012
|
|
Pilot_PA_1_B.jpgPilot90 viewshubcapperJun 09, 2012
|
|
Pilot_PA_1_A.jpgPilot92 viewsIt was manufactured in Richmond, Indiana between 1909-1924.
It is pressed aluminum.
It is 3" OD and 1-5/8" high.
hubcapperJun 09, 2012
|
|
Brush_Hubcap_Casting_Mould.jpgBrush Casting Mould99 viewsMade from wood. Often borrowed by Brush owners wanting to get a complete set of new capshubcapperJun 05, 2012
|
|
Brush_CB_1_B.jpgBrush99 viewshubcapperJun 05, 2012
|
|
| 2997 files on 200 page(s) |
 |
|
|
|
|
8 | |
|
|
|
|
